Index - Comtech EF Data CDM-600 Installation And Operation Manual

1:1 manual switch, 6–41
16-QAM Viterbi, Rate 3/4, 7-25
8-PSK/TPC Coding Summary 7-6
8-PSK/TPC Rate 2/3, 7-20
Activation Procedure, 1–6
Address, 6–26, 6–34, 16–2, 16–3, 16–18,
16–23
Alarm, 6–2, 6–36, 9–1, 9–3, 9–4, 12–3, 16–
15, 16–18, 16–20, 16–21, 16–22, 16–26,
16–37
AUPC, 1–2, 1–4, 6–6, 6–9, 6–10, 6–38, 6–
39, 11–3, 12–1, 12–2, 12–3, 12–4, 15–1,
15–7, 16–12, 16–13, 16–14, 16–18, 16–
20, 16–37
Automatic Uplink Power Control, 1–2, 12–
1, 15–2
Backward Alarms, 6–28
Basic Protocol, 16–2
Buffer Disabled, 10–3
Buffer Enabled, 10–3
Compatibility, 1–8
Compensation Rate, 12–3
CONFIG, 6–6, 6–7, 6–8, 6–9, 6–10, 6–11,
6–12, 12–2, C–1, C–2
A
B
C
i–1
CLOCKS, 6–19
DROP TIMESLOTS, 6–22
EDMAC, 6–23
HIGH-RATE ESC, 6–25
IMPEDANCE, 6–29
INSERT TIMESLOTS, 6–23
MASKS, 6–27
REMOTE CONTROL, 6–26
RX, 6–14
RX PARAMTERS, 6–39
STATISTICS, 6–29
STATS, 6–38
TERNARY CODES, 6–24
WARM-UP DELAY, 6–25
Configuration, 2–4, 6–5, 16–18, 16–28, 16–
29
Connect External Cables, 2–4
D&I Framing, 9–3
D&I Primary Data Interfaces, 9–3
D&I++, 1–2, 6–20, 10–6, 10–7, 10–8, 11–4,
12–1, 15–2, 15–7, 16–9, 16–15, 16–17,
16–20, 16–22, 16–36
Data Interfaces, 1–3
Demod Unlock, 12–3
Demodulator, 15–7, 16–20, 16–37
Dimensional Envelope, 4–6
Drop & Insert ++, 11–4, 15–1
Drop and Insert, 1–1, 1–5, 6–22, 9–1, 9–2,
10–1, 10–3, 10–6, 10–9, 15–1, 15–6, 16–
20, 16–36, 16–38
Drop and Insert Clocking, 10–9

Index

D