Engineer 1; Option 51 - Parameters - Honeywell GX-Series Installation And Setup Manual

Engineer 1

Option 51 – Parameters
This option allows the engineer to modify the system functions. Options can be selected using the A> or <B
keys or by entering the two digit parameter number and pressing the ent key. The selected options can then
be programmed by using the A> key to increase or the <B key to decrease the values assigned to the
parameter; pressing the ent key accepts the new value and returns to the previous menu level. Any
parameters that differ from this procedure are indicated in the following paragraphs. The parameters also
prompt the engineer on which keys to press.
For example, press:
•
1 then 6 parameter 16 = Soak Time selected;
•
ent currently soak time is displayed along with the programmable range 07 (1–14) days;
•
08 value of the required soak time, the display shows the new value 08 (1–14) days;
•
ent accept the programming and return to 16 = Soak Time displayed.
NOTE: Default settings must be changed before programming in Menu Option 55 – Soak.
Assigning Parameters to Groups
Several of the parameters allow separate values to be assigned to the groups on the system. If groups have
been enabled, the relevant parameters prompt for a group to be selected; when selected, the value is
assigned to the group parameter using the procedure outlined in the previous example.
The parameters that permit group selection are indicated in the following paragraphs.
Parameter
01 Bell Time
02 Bell Delay
03 Abort Time
04 Exit Time
05 Entry Time
06 System Reset
07 Tamper Reset
08 No. Re-arms
09 Omit All
10 Key '0'
11 Local Part
12 Banner
13 PA Delay
14 KEY/SW Level
15 System Text
16 Soak Time
17 Restart
18 Stop Set
19 Part Alarm
20 Power Delay
21 Reset Mgr.
22 PA reset
23 Print Codes
24 Exit Alarm
25 Global Copy
26 Forced
27 cct Debounce
28 Online print
29 Online level
30 Video
31 Delay Alarm
32 Show Alarms
33 Secure Code
34 Comfort Time
35 Fail To Set
36 Battery Size
37 Standby Time
38 ATM Delay
GX-Series Control Panel Installation and Setup Guide
Groups GX-Series
 
 
 
 
 
 
 
 
 

not available
 

not available
 

not available

not available

not available

not available

not available
 
 

not available
 

not available
 

not available

not available

not available

not available

not available
 
 

not available

not available

not available



not available

not available

not available
Table 6-8. System Parameters
Parameter
39 ATM Timeout
40 Not Used
41 Weekend Work
42 PIN Change
43 Not Used
44 Early Open
45 High Security
46 Res. Select
47 Set Confirm
48 Alarm Limits
49 Confirm Time
50 Not Used
51 Not Used
52 Not Used
53 Not Used
54 Keypad Access
55 Confirm
56 Force Restore
57 Bell Extend
58 Power Alarm
59 Part Tone
60 Not Used
61 Activity Mon
62 Lockout
63 Banner alerts
64 Set Override
65 Reset Levels
66 Min Pin Size
67 Level Format
68 Line Fail
69 Alert Inds
70 SWDC Set Dly
71 MF BL Enable
72 Max Alm Cause
73 Guard Unset
74 Back-up Link
75 Back-up Timer
6-39
Groups GX-Series

not available
not available not available

not available

not available
not available not available

not available

not available

not available

not available

not available

not available
not available not available
not available not available
not available not available
not available not available

not available

not available

not available

not available

not available

not available
not available not available

not available

not available

not available

not available

not available

not available

not available

not available

not available

not available

not available

not available

not available

not available

not available