Table of Contents
Advertisement
GX-Series Control Panel Installation and Setup Guide
KEYPAD TEXT
DL/SL ALM
PA Delayed Silent zone activated after PA Delay timeout.
DOOR PROP
MAX - Door left open
DR MASKED
Detector Masked. Activity Monitoring of zone has failed.
DUAL
Dual (Double Knock) zone activated (opened).
DURESS
Duress code has been entered
ENG ASSEM
Engineering Assemble Zone Menu (Menu Option 64) has been accessed.
ENG CHECK
Engineering Pre-Check Menu (Menu Option 66) has been accessed.
ENG DIAG
Engineering Diagnostics Menu (Menu Option 61) has been accessed.
ENG DIGI
Engineering Digicom (Communications) (Menu Option 56) has been accessed.
ENG GROUP
Engineering Groups (Menu Option 63) has been accessed.
ENG KPAD
Engineering Keypad (Menu Option 58) has been accessed.
ENG LINKS
Engineering Links (Menu Option 54) has been accessed.
ENG O/PS
Engineering Outputs (Menu Option 53) has been accessed.
ENG PARAM
Engineering Parameters (Menu Option 51) has been accessed.
ENG PRINT
Engineering Print (Menu Option 57) has been accessed.
ENG QUICK
Engineering Quick Menu (Menu Option 59) has been accessed.
ENG SOAK
Engineering Soak Test (Menu Option 55) has been accessed
ENG TEST
Engineer Test of the system via the Telecom Module.
ENG TMRS
Engineering Timers A/B (Menu Option 65) has been accessed.
ENG ZONES
Engineering Zones (Menu Option 52) has been accessed.
ENG TAMP
Tamper when entering Engineer Mode.
+ENGINEER
Entering Engineer
–ENGINEER
Leaving Engineer
ENT DELAY
User entering Ent Delay State
ENT SET
User entering Ent Set State
ENT SETNG
User entering Setting State
ENT UNSET
User entering Unset State
ENT UNST
User entering Unsetting (disarming) State
+ENTRY
Entry zone activated (opened) during Setting/Unsetting (arming/disarming)
procedure or when Set.
–ENTRY
Entry zone de-activated (closed) during Setting/Unsetting (arming/disarming)
procedure or when Set.
ETST FAIL
Engineer test has failed
ETST PASS
Engineer test has passed
+EXIT
Exit zone activated (opened) during the Unsetting (disarming) procedure or
when Set.
–EXIT
Exit zone de-activated (closed) during the Unsetting (disarming) procedure or
when Set.
EXITGUARD
ExitGuard zone activated (opened).
EXTENSION
System or Group(s) are in the Autoset Extension period.
FAIL SET
Fail to set event. 7.
+FAULT
Fault condition activated on zone
–FAULT
Fault condition cleared from zone
FAULT RST
Fault has been cleared
FB BAT
LOW RF Fob has low battery
+FINAL
Finalzone activated (opened) during Setting/Unsetting (arming/disarming)
procedure or when Set.
–FINAL
Final zone de-activated (closed) during Setting/Unsetting (arming/disarming)
procedure or when Set.
FIRE
Fire zone activated (opened).
FOB REJCT
Illegal fob
FORCE OMT
Force Omit of a zone (Menu Option 14).
FULL SET
Full Set (Menu Option 12) of the system or Group(s).
FULL TEST
Full Test (Menu Option 62) has occurred.
◊
Fault with 14.5V protection on Power Supply Unit
FUSE 14.5
◊
Fault with AUX1 protection on Power Supply Unit
FUSE AUX1
◊
Fault with AUX2 protection on Power Supply Unit
FUSE AUX2
◊
Change fuse to protection.
FUSE BELL
+GRP OMIT
Area bypass has occurred (Group(s) has been omitted).
–GRP OMIT
Group omit/area bypass has finished (Group(s) has been un-omitted).
+HIGH RES
Zone changing to High Resistance (1200 to 1300 Ohm) Engineer Log only.
◊
The PC board uses a PTC device instead of a fuse. The PTC serves as an automatically resetting fuse.
DESCRIPTION
D-2
TRIGGER
EVENT
1. PA/duress
M
4. Security
NM
15. Trouble
20. Fault
2. Intruder
M
1. PA/Duress
M
14. Menu Access
M
14. Menu Access
M
14. Menu Access
M
14. Menu Access
M
14. Menu Access
M
14. Menu Access
M
14. Menu Access
M
14. Menu Access
M
14. Menu Access
M
14. Menu Access
M
14. Menu Access
M
14. Menu Access
M
Always TR
NM
14. Menu Access
M
14. Menu Access
M
None
NM
Mode. Always TR
NM
Mode. Always TR
NM
None
NM
None
NM
None
NM
None
NM
None
NM
None
NM
None
NM
None
NM
None
NM
2. Intruder
NM
2. Intruder
NM
16. Log
NM
10. Setting
NM
Set Fault
M
20. Fault
M
20. Fault
M
20. Fault
NM
None
NM
7. Set Fault
NM
7. Set Fault
NM
6. Fire
M
None
M
8. Omit
M
10. Setting
M
None
NM
13. Elec. Status
M
20. Fault
9. Tamper
M
13. Elec. Fault
9. Tamper
M
13. Elec. Status
9. Tamper
M
13. Elec. Status
8. Omit
M
8. Omit
M
15. Trouble
M
Advertisement
Table of Contents
