Honeywell GX-Series Installation And Setup Manual page 198

GX-Series Control Panel Installation and Setup Guide
KEYPAD TEXT
PA PA zone activated (opened)
PA DEL/SL PA Delayed Silent zone activated (opened).
PA DELAY PA Delayed zone activated (opened).
PA RESET PA Reset has occurred.
PA SILENT PA Silent zone activated (opened).
PA UNSET PA Unset zone activated while group in unset (disarmed) condition.
PART SET Part Set of system or Group(s).
PF RESET System has returned to the set status after a power failure.
PREWARN System or Group(s) in the Autoset Prewarning period.
PRINT OC Print On Command.
PRINT OL Print On Line, the automatic printing of the Event Log. Not to be confused with
the printer on-line message from a printer.
+PRT ENTRY Part Entry zone activated (opened).
–PRT ENTRY Part Entry zone de-activated (closed).
+PRT FINAL Part Final zone activated (opened).
–PRT FINAL Part Final zone de-activated (closed).
+PSU FLT Power Supply Unit fault
PUSH SET Push Set (Exit Terminator) zone activated (opened).
R.TIMESET Remote timeset.
REARM Rearm of system has occurred.
RECEN.SET Recent Set. Alarm occured within 5 minutes of set.
REM ABORT Remote connection timeout.
+REM CALL Remote device connected.
–REM CALL Remote device disconnected.
REM COPY Remote Copy of site details via SIA has occurred.
REM FAIL Remote failure after all retries.
REM FIN Remote connection finished.
REM ID Remote suite ID menu accessed.
REM LOG Remote log menu accessed.
REM MSG Remote message menu accessed.
REM OVRWR Remote Overwrite via SIA has occurred.
REM RESET Remote reset menu accessed.
REM TRY First remote connection attempt logged.
REM WR/RD Diagnostics remote read/write
REMOVED Engineer has Removed a module from the system.
RF BATLOW RF Battery low
RF JAM RF signal jammed
RF MEM! RF RIO Non Volatile Memory failed
RF SUPER RF Supervision failure
RM ACCESS Remote Access zone activated
+SEC FINAL Security Final zone activated (opened)
-SEC FINAL Security Final zone closed (closed)
+SECURITY Security zone activated (opened).
–SECURITY Security zone de-activated (closed).
SET LOG Set Log zone activated (opened) when the system or group(s) is set.
SOAK TEST Zone under Soak Test (Menu Option 55) activated when the system or group(s)
is Set.
SPARE Spare zone opened.
STANDLOW Standby time for the battery is Low.
SUSP. SET Setting of system suspended
SYS RESET System Reset has occurred event.
TAG REJECTED Rejected card
TAG VALID Valid card
TAG HARD Hard APB
ANTIPASSBACK
TAG SOFT Soft APB
ANTIPASSBACK
TAG REJECT NOT Rejected card - no group match
GRP MATCH
DESCRIPTION
D-4
TRIGGER
EVENT
1. PA/Duress M
1. PA/Duress M
1. PA/Duress M
1. PA/Duress NM
1. PA/Duress M
1. PA/Duress M
10. Setting M
20. Fault NM
None NM
None NM
None NM
2. Intruder NM
2. Intruder NM
18. Zone restoral
2. Intruder NM
2. Intruder NM
18. Zone restoral
13. Elec. Status M
20. Fault
None NM
None NM
10. Setting M
2. Intruder M
None NM
14. menu access NM
14. Menu access NM
None NM
None NM
None NM
None NM
None NM
None NM
None M
None NM
None NM
None M
9. Tamper M
13. Elec. Status M
15. Trouble
20. Fault
15. Trouble M
20. Fault
9. Tamper M
19. RF M
Supervision 20.
Fault
14. Menu Access NM
4. Security M
4. Security M
18. Zone restoral
4. Security M
4. Security M
18. Zone restoral
16. Log zone M
None NM
16. Log zone M
13. Elec status M
None NM
11. Reset/Cancel NM