Honeywell GX-Series Installation And Setup Manual page 154

GX-Series Control Panel Installation and Setup Guide
Multi-group Systems
The GX-520 panels have 32 groups; these are displayed on the keypad in block of eight groups, sub-
divided into A, B, C and D. Use the A> or <B key to move between the group blocks; press keys 1 – 8 to
assign the relevant groups in each block to the user.
When the required groups have been assigned to the user, press the ent key to accept the programming
and return to the previous menu level.
NOTE: Also see menu 53, to control the buzzer operation on each keypad. This is independent of the
keypad group parameter.
6-108