Chapter 2 Components
2.1 Controller Enclosure
●
For 3.5" Disks
Figure 2.10 3.5" type disk
Figure 2.11
Figure 2.11 Disk slot numbers (3.5" type controller enclosure)
●
Part explanation
•
LEDs
The states of LEDs are listed below.
Table 2.3
DISK READY/
FAULT
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
DISK READY/FAULT LED
shows the slot number of each disk.
Slot#8
Slot#9
Slot#4
Slot#5
Slot#0
Slot#1
Do Not
WARNING
•
System disks are installed in Slot#0 and Slot#1. Never remove
system disks. Doing so will render the ETERNUS DX Disk storage
system unusable.
Status and meanings of each LED (3.5" disks)
LED name
LED status
(green)
(blinks green)
(orange)
Copyright 2014 FUJITSU LIMITED
Slot#10
Slot#11
Slot#6
Slot#7
Slot#2
Slot#3
The disk is operating normally.
The disk is in error status.
32
Disk status
P3AM-5502-05ENZ0