Fujitsu Eternus DX60 S2 User Manual page 123

Chapter 5 Setup
5.2 ETERNUS DX Disk Storage System Monitoring Setup
■
SNMP Trap test
Perform the SNMP Trap test to check that the SNMP Trap can be sent from the ETERNUS DX
Disk storage system to the SNMP Manager.
The SNMP Trap test setting is explained below.
Procedure
1
1-1
1-2
1-3
1-4
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Perform SNMP Trap Test
Start ETERNUS Web GUI.
Click [Perform SNMP Trap Test] under the [Network Settings] menu on the [Global
Settings] tab in the ETERNUS Web GUI screen.
The [Perform SNMP Trap Test] screen appears.
Click the [Send] button.
A confirmation screen appears.
Click the [OK] button.
The SNMP Trap Test is performed.
Copyright 2014 FUJITSU LIMITED
123
P3AM-5502-05ENZ0