Chapter 3 Rack Installation
3.1 Installing Power Distribution Unit (For Regions other than EMEA&I)
3.1
Installing Power Distribution Unit (For Regions other
than EMEA&I)
This section describes how to install the power distribution unit in a rack.
3.1.1
Installing Power Distribution Unit (1U)
This section describes how to install the 1U power distribution unit in a rack.
Procedure
1
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Do Not
CAUTION
•
Do not connect any devices other than the ETERNUS DX Disk
storage system to the power distribution unit.
Remove the two brackets temporarily attached to the power distribution unit.
Remove the two M3 screws from the front of the power distribution unit to free the
brackets.
Bracket A
Power distribution unit
M3 screw
M3 screw
Copyright 2014 FUJITSU LIMITED
Bracket B
46
P3AM-5502-05ENZ0