Fujitsu Eternus DX60 S2 User Manual page 88

Chapter 5 Setup
5.1 Basic Setup
■ For iSCSI
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
On the [Set iSCSI Port Parameters] screen, set the information for the connection
(detailed iSCSI port information) between the ETERNUS DX Disk storage system iSCSI
port and the server.
(1)
Select a port and specify the required items in "Select Port", and click the [Next>]
button.
A confirmation screen appears.
(2)
Click the [OK] button.
The port parameters are set, and the [Setup Network Environment] screen appears.
Copyright 2014 FUJITSU LIMITED
88
P3AM-5502-05ENZ0