Fujitsu Eternus DX60 S2 User Manual page 121

Disk storage system
Hide thumbs Also See for Eternus DX60 S2:
Table of Contents

Advertisement

Chapter 5 Setup
5.2 ETERNUS DX Disk Storage System Monitoring Setup
4
4-1
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
(4) Confirm that the added community is displayed in the "Community List" field.
(6)
Set SNMP trap destination
(1) Click the [Trap] link on the left of the screen.
The trap setting screen appears.
(2) Click the [Add] button in the "Trap List" field.
The "Set Trap" field appears.
(3) Select the Manager No. for the SNMP Manager that is specified in
"When using SNMP v2c/v3" (page 117)
(4) Confirm that the added trap destination is displayed in the "Trap List" field.
(7)
Click the [Set] button.
A confirmation screen appears.
(8)
Click the [OK] button.
The settings are reflected.
Download MIB File
Download the extended MIB definition file that is registered in the ETERNUS DX Disk
storage system.
Click the [Download MIB File] under the [Network Settings] menu on the [Global
Settings] tab in the ETERNUS Web GUI screen.
The [Download MIB File] screen appears.
Copyright 2014 FUJITSU LIMITED
and click the [OK] button.
121
Step (2)
of
P3AM-5502-05ENZ0

Advertisement

Table of Contents
loading

Table of Contents