Setup E-Mail Notification - Fujitsu Eternus DX60 S2 User Manual

Chapter 5 Setup
5.2 ETERNUS DX Disk Storage System Monitoring Setup
11
5.2.2

Setup E-Mail Notification

If an error occurs in the ETERNUS DX Disk storage system, the event (error information, etc.) is
reported to a specified address.
The e-mail setting is explained below.
Procedure
1
2
3
4
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Click the [OK] button.
The event notification settings are applied.
Start ETERNUS Web GUI.
Click [Setup E-Mail Notification] under the [Network Settings] menu on the
[Global Settings] tab in the ETERNUS Web GUI screen.
The [Setup E-Mail Notification] screen appears.
Set the necessary items in the [Notification E-Mail] area.
• Select "Enable" in "Notification E-Mail".
• Specify the E-mail destination address in "Destination E-Mail Address".
Click the "Mail Server Settings" link.
The [Mail Server Settings] screen appears.
Copyright 2014 FUJITSU LIMITED
110
End of procedure
P3AM-5502-05ENZ0