Fujitsu Eternus DX60 S2 User Manual page 102

Chapter 5 Setup
5.1 Basic Setup
6
■ When the Host Affinity function is used
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Define LUN Mapping
Set a volume to be recognized by the server.
Assign an affinity group to each server that is to be connected to the port.
(1)
Select the port to be set from the "Port List" field, and click the [Edit] button.
(2)
Assign the affinity group to the server, and click the [Set] button.
A confirmation screen appears.
(3)
Click the [OK] button.
The affinity group is created, and the screen returns to the screen displayed in
Set other affinity groups as required.
(4)
Click the [Finish] button.
The settings are reflected, and a message to confirm finishing the Configuration Wizard
appears.
Copyright 2014 FUJITSU LIMITED
102
Step (1).
P3AM-5502-05ENZ0