Fujitsu Eternus DX60 S2 User Manual page 99

Chapter 5 Setup
5.1 Basic Setup
■ For iSCSI
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
On the [Setup iSCSI Host] screen, set the iSCSI name, IP address, and other items for the
server being connected to the ETERNUS DX Disk storage system.
(1)
Click the [Add] button on the [Setup iSCSI Host] screen
(2)
Specify an iSCSI name, IP address, server name, and host response.
(3)
Specify the other required items, and click the [Add] button.
The target iSCSI host is displayed in the "Registered iSCSI Host List" field.
(4)
When adding another iSCSI host, repeat
If another iSCSI host does not need to be added, click the [Done] button.
(5)
Click the [Next>] button.
A confirmation screen appears.
(6)
Click the [OK] button.
The settings are reflected and the [Configure Affinity Group] screen in
Copyright 2014 FUJITSU LIMITED
Step (2) and
99
Step (3).
Step 5 appears.
P3AM-5502-05ENZ0