Fujitsu Eternus DX60 S2 User Manual page 119

Chapter 5 Setup
5.2 ETERNUS DX Disk Storage System Monitoring Setup
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
(3) Specify the view name and the subtree, and click the [OK] button.
(4) Confirm that the added MIB view is displayed in the "MIB View List" field.
(4)
Set user
The user setting must be performed to use SNMP v3 for SNMP
communication between the SNMP Agent and the SNMP Man-
ager. This setting is not required for SNMP v2c.
(1) Click the [User] link on the left of the screen.
The user setting screen appears.
(2) Click the [Add] button in the "User List" field.
The "Set User" field appears.
Copyright 2014 FUJITSU LIMITED
119
P3AM-5502-05ENZ0