Fujitsu Eternus DX60 S2 User Manual page 122

Chapter 5 Setup
5.2 ETERNUS DX Disk Storage System Monitoring Setup
4-2
4-3
4-4
■
Monitoring Server Settings
Install and set up the monitoring software on the server side.
Refer to the manual that is provided with the monitoring software to install and set the monitoring
software.
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Specify the required items and click the [Download] button.
Select the "The ServerView control code is added to the comment
line of the MIB definition file" checkbox when downloading the
MIB file used to monitor the ETERNUS DX Disk storage system
by ServerView.
A confirmation screen appears.
Click the [OK] button.
The MIB definition file is downloaded. A screen to save the downloaded MIB definition
file appears.
Save the downloaded file.
Register the file that was downloaded in
storage system settings" as the extended MIB definition file for the
monitoring software.
Copyright 2014 FUJITSU LIMITED
Step 4
122
of "ETERNUS DX Disk
P3AM-5502-05ENZ0