Chapter 5 Setup
5.2 ETERNUS DX Disk Storage System Monitoring Setup
2
2-1
2-2
2-3
2-4
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Switch SNMP Daemon (SNMPD)
To switch the SNMPD (SNMP v1 or SNMP v2c/v3) that is to be used, change the SNMPD
using the [Switch SNMPD] screen.
•
When switching the SNMPD, select "Disable" for "SNMP Func-
IMPORTANT
tion" in the [Setup SNMP Agent] screen.
•
If the SNMPD is switched, the current SNMP Agent environment
settings are deleted.
•
After switching the SNMPD, reboot the ETERNUS DX Disk
storage system.
Click [Switch SNMPD] under the [Network Settings] menu on the [Global Settings] tab
in the ETERNUS Web GUI screen.
The [Switch SNMPD] screen appears.
Check "Supported SNMP Version" and confirm the current SNMPD and the SNMPD
that is to be used at the next power-on. When changing SNMPD, click the [Switch]
button.
A confirmation screen appears.
Click the [OK] button.
Reboot the ETERNUS DX Disk storage system.
Copyright 2014 FUJITSU LIMITED
113
P3AM-5502-05ENZ0