Fujitsu Eternus DX60 S2 User Manual page 105

Chapter 5 Setup
5.1 Basic Setup
For details on the setting procedures, refer to "ETERNUS Web GUI User's Guide".
Procedure
1
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Do Not
CAUTION
• Do not uninstall the disks that are installed by default or move them
to any other slot.
Contact your sales representative or maintenance engineer if disks
that are installed by default need to be uninstalled or moved to
another slot.
This section explains the procedure to assign hot spares using ETERNUS
Web GUI. For assigning hot spares using ETERNUS CLI, refer to
"ETERNUS CLI User's Guide".
In the ETERNUS Web GUI screen, click [Assign Hot Spare] under the [RAID
Group Management] menu on the [Volume Settings] tab.
The [Assign Hot Spare] screen appears.
Copyright 2014 FUJITSU LIMITED
105
P3AM-5502-05ENZ0