Minisas Cable Connection (For Sas) - Fujitsu Eternus DX60 S2 User Manual

Chapter 4 Connecting Cables
4.2 Host Interface Connection
Procedure
1
2
4.2.3

MiniSAS Cable Connection (For SAS)

Connect the ETERNUS DX Disk storage system to the server using miniSAS cables.
MiniSAS cables (ETERNUS DX Disk storage system connector: SFF8088) must be obtained
separately.
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Connect the LAN cable to the ETERNUS DX Disk storage system.
Insert the LAN cable connectors in the controller 0 (CM#0) and controller 1 (CM#1) iSCSI
ports.
CAUTION
•
Connect the LAN cable to the connection destination.
Connect the connector at the other end of the LAN cable to the connection destination. For
connection details, refer to the documentation of the device that is being connected to.
Copyright 2014 FUJITSU LIMITED
Do
When connecting the LAN cables, position them so that they
will not obstruct replacement of the power supply unit or
controllers by the maintenance engineer.
67
End of procedure
P3AM-5502-05ENZ0