Chapter 3 Rack Installation
3.2 Installing Controller Enclosure
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
(2)
Attach the flange cover to the front left of the controller enclosure.
Slide the tab inside the top of the flange cover over the top-left corner of the controller
enclosure.
When fitting the flange cover, be careful not to touch the power
IMPORTANT
switch (
Flange cover
(3)
Use the thumb screw of the flange cover to fasten the front left of the controller
enclosure to the rack.
Thumb screw
Copyright 2014 FUJITSU LIMITED
).
54
P3AM-5502-05ENZ0