Fujitsu Eternus DX60 S2 User Manual page 100

Chapter 5 Setup
5.1 Basic Setup
■ For SAS
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
On the [Setup SAS Host] screen, set the SAS address, and other items for the server
being connected to the ETERNUS DX Disk storage system.
(1)
Click the [Add] button on the [Setup SAS Host] screen
(2)
Specify a SAS address, server name, and host response.
(3)
Specify the other required items, and click the [Add] button.
The target SAS host is displayed in the "Registered SAS Host List" field.
(4)
When adding another SAS host, repeat
If another SAS host does not need to be added, click the [Done] button.
(5)
Click the [Next>] button.
A confirmation screen appears.
(6)
Click the [OK] button.
The settings are reflected and the [Configure Affinity Group] screen in
Copyright 2014 FUJITSU LIMITED
Step (2) and
100
Step (3).
Step 5 appears.
P3AM-5502-05ENZ0