Table 1.2 Lan Port Availability - Fujitsu Eternus DX60 S2 User Manual

Chapter 1 Preparation
1.1 Connection Preparation
1.1.2.3 Notes on LAN Connection
■
Network communication protocols
The usable LAN ports and functions are different depending on the usage and protocol.
The following table shows how the LAN ports may be used (by usage and protocol).
Table 1.2
Usage
ETERNUS Web
GUI
ETERNUS CLI
SNMP
SMI-S
E-mail
NTP
REMCS (*4)
(remote
support)
Yes: Available / No: Not available
*1: Only the following functions are available:
-
-
*2: May use either the MNT port or RMT port.
*3: Modifiable
*4: REMCS is available for regions other than EMEA&I.
For details on the port numbers for the following Storage Foundation Software ETERNUS SF,
refer to the manual of each Storage Foundation Software ETERNUS SF.
• ETERNUS SF Storage Cruiser
• ETERNUS SF AdvancedCopy Manager
• ETERNUS SF Express
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
LAN port availability
tcp /
Protocol
udp
http / tcp
https
telnet / tcp
ssh
ftp tcp
(client)
agent snmp udp
trap snmp udp
trap
http / tcp
https
smtp tcp
(client)
NTP udp
smtp tcp
http tcp
(client)
Checking the ETERNUS DX Disk storage system status
Switching the Master CM
Copyright 2014 FUJITSU LIMITED
Master CM
Port
Direction
number
MNT
80 / 443 from
Yes
23 / 22 from
Yes
21 to
Yes
161 from Yes
162 (v1) to Yes
(*2)
Must be set
(v2c/v3)
5988 / 5989 from
Yes
25 (*3) to Yes
(*2)
123 to Yes
(*2)
Must be set to Yes
(*2)
Must be set to
Yes
(*2)
23
Slave CM
Remarks
RMT MNT RMT
Accessed from
No *1 *1
a Web browser
–
Yes *1 *1
–
Yes *1 *1
Yes Yes Yes –
Yes No No –
(*2)
Used for SMI-S
No No No client
communication
Yes Used for failure
No No
(*2) notification, etc.
Yes –
No No
(*2)
Yes Used for failure
No No
(*2) notification, etc.
Used for
Yes
No No firmware
(*2)
download, etc.
P3AM-5502-05ENZ0