Fujitsu Eternus DX60 S2 User Manual page 47

Chapter 3 Rack Installation
3.1 Installing Power Distribution Unit (For Regions other than EMEA&I)
2
3
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Attach the brackets and holders to the rack.
Bracket A
Screw
holders
M6 screws
Holder
(Rear rack pillars)
M6 screws
The four M6 screw positions for the brackets are determined relative to the power
distribution unit base line.
The M6 screws should be inserted in the 1st and 3rd holes above the base line.
(Rear rack pillars)
[Left]
3rd position
(M6 screws)
1U Power distribution unit
1st position
(M6 screws)
Base line of
Power distribution unit
Install the power distribution unit in the rack.
Fasten the power distribution unit to the bracket with the two M3 screws removed in
1.
M3 screw
(Rear rack pillars)
M3 screw
Copyright 2014 FUJITSU LIMITED
Holder
Bracket B
Screw
holders
[Right]
3rd position
(M6 screws)
1st position
(M6 screws)
Brackets
47
Step
P3AM-5502-05ENZ0