Fujitsu Eternus DX60 S2 User Manual page 87

Chapter 5 Setup
5.1 Basic Setup
5
■ For FC
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Set Port Parameters.
Set the connecting information for the port.
Setting screens will vary depending on the ETERNUS DX Disk storage system model.
When using the Host Affinity functions, make sure to "Enable" the
IMPORTANT
Host Affinity setting of the port.
On the [Set FC Port Parameters] screen, set the information for the connection (detailed
FC port information) between the ETERNUS DX Disk storage system FC port and the
server.
(1)
Select a port and specify the required items in "Port Settings", and click the [Next>]
button.
A confirmation screen appears.
(2)
Click the [OK] button.
The port parameters are set, and the [Setup Network Environment] screen appears.
Copyright 2014 FUJITSU LIMITED
87
P3AM-5502-05ENZ0