Fujitsu Eternus DX60 S2 User Manual page 90

Chapter 5 Setup
5.1 Basic Setup
6-2
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
• Disabling unused protocols is a standard security measure. If
the following "Interface" fields are set to "Disable", network
access to the ETERNUS DX Disk storage system via the
services that use these protocols is blocked.
-
-
-
-
• To allow connection to devices in a network to which the
ETERNUS DX Disk storage system does not belong, set
"Gateway".
After setting "Gateway", set the IP address (network address)
or global address of the connection destination device in
"Allowed IP List". These settings are not required when the
ETERNUS DX Disk storage system is accessed from the
same network address as the ETERNUS DX Disk storage
system.
A confirmation screen appears.
Click the [OK] button.
The Network Environment is set, and the [Finish] screen appears.
Copyright 2014 FUJITSU LIMITED
"http", "https"
To block ETERNUS Web GUI access.
"telnet", "SSH"
To block ETERNUS CLI access.
"Maintenance", "Maintenance-Secure"
To block monitoring software access.
"ICMP"
To block "ping" requests.
90
P3AM-5502-05ENZ0