Fujitsu Eternus DX60 S2 User Manual page 112

Chapter 5 Setup
5.2 ETERNUS DX Disk Storage System Monitoring Setup
■
ETERNUS DX Disk storage system settings
The ETERNUS DX Disk storage system settings is explained below.
Procedure
1
1-1
1-2
1-3
1-4
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Set up the network environment for the ETERNUS DX Disk storage system.
When the ETERNUS DX Disk storage system and the monitoring server are in different
subnet environments, set the Gateway IP address and the destination (IP address of the
monitoring server or the network address to which the monitoring server belongs) on the
[Setup Network Environment] screen of ETERNUS Web GUI.
For details on the settings, refer to "ETERNUS Web GUI User's Guide".
Start ETERNUS Web GUI.
Click [Setup Network Environment] under the [Network Settings] menu on the [Global
Settings] tab in the ETERNUS Web GUI screen.
The [Setup Network Environment] screen appears.
Set the required items and click the [Set] button.
Enter the default gateway and any "Allowed IP List" devices.
A confirmation screen appears.
Click the [OK] button.
The network environment is set, and the [Setup Network Environment] screen is
closed.
Copyright 2014 FUJITSU LIMITED
112
P3AM-5502-05ENZ0