Figure 2.12 Front View Of 2.5" Type Controller Enclosure (Without Flange Cover); Figure 2.13 Disk Slot Numbers (2.5" Type Controller Enclosure) - Fujitsu Eternus DX60 User Manual

Disk storage system
Hide thumbs Also See for Eternus DX60:
Table of Contents

Advertisement

Chapter 2 Components
>
2.2 2.5" Type Controller Enclosure
Without flange cover

Figure 2.12 Front view of 2.5" type controller enclosure (without flange cover)

Disk slot numbers
Figure 2.13

Figure 2.13 Disk slot numbers (2.5" type controller enclosure)

CAUTION
P3AM-3042-06ENZ0
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
AUTO POWER Switch
Enables the AC Auto-Link Mode
(This function automatically turns on the linked
device once AC power is supplied).
This switch is set to "OFF" as the factory setting.
MODE SELECT Switch
Enables the device power to be turned on via
power linkage
This switch is set to "ON" as the factory setting
and should not be set to "OFF".
IP RESET Switch
For dual controller model, click once to switch
the Master CM LAN port from the current controller
to the other controller.
Click twice in succession within a two second
interval to revert the LAN port settings of the
ETERNUS DX60/DX80/DX90 to their factory
settings.
shows the slot number of each disk.
Do Not
RAID groups, volumes, and hot spares are factory set. Disks which
contain RAID groups or volumes, or disks which are hot spares
should not be moved to another slot.
58
Copyright 2010 FUJITSU LIMITED

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eternus dx80Eternus dx90

Table of Contents