Figure 2.8 2.5" Type Disk; Figure 2.9 Disk Slot Numbers (2.5" Type Controller Enclosure); Table 2.2 Status And Meanings Of Each Led (2.5" Disks) - Fujitsu Eternus DX60 S2 User Manual

Chapter 2 Components
2.1 Controller Enclosure
■
Disk
●
For 2.5" Disk
DISK READY LED
Figure 2.8
Figure 2.9
Figure 2.9
●
Part explanation
• LEDs
The states of LEDs are listed below.
Table 2.2
DISK READY
DISK FAULT
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
DISK FAULT LED
2.5" type disk
shows the slot number of each disk.
Disk slot numbers (2.5" type controller enclosure)
Do Not
WARNING
• System disks are installed in Slot#0 and Slot#1. Never remove
system disks. Doing so will render the ETERNUS DX Disk storage
system unusable.
Status and meanings of each LED (2.5" disks)
LED name LED status
(green)
(blinks green)
(orange)
Copyright 2014 FUJITSU LIMITED
The disk is operating normally.
The disk is in error status.
31
Disk status
P3AM-5502-05ENZ0