Teldat bintec R3002 Manual page 90

10 System Management
76
System Management
Fig. 30:
Note
All Teldat devices are delivered with the same username and password. As long as
the password remains unchanged, they are not protected against unauthorised use.
Make sure you change the passwords to prevent unauthorised access to the device
If the password is not changed, under System Management->Status there appears
the warning: "System password not changed!"
The System Management->Global Settings->Passwords menu consists of the following
fields:
Fields in the System Password menu.
Field
System Admin Pass-
word
Confirm Admin Pass-
word
Fields in the SNMP Communities menu.
Field
SNMP Read Com-
munity
SNMP Write Com-
Global Settings Passwords
-> ->
Value
Enter the password for the user name
This password is also used with SNMPv3 for authentication
(MD5) and encryption (DES).
Confirm the password by entering it again.
Value
Enter the password for the user name
Enter the password for the user name
Teldat GmbH
.
.
.
bintec Rxxx2/RTxxx2