Teldat bintec R3002 Manual page 380

Table of Contents

Connection Type

Tunnel Profile

Connection Idle

Fields in the IP Mode and Routes menu.

IP Address Mode

Select whether the L2TP partner is to take on the role of the

L2TP network server (LNS) or the functions of a L2TP access

concentrator client (LAC client).

Possible values:

(default value): If you select this option, the L2TP partner

is configured so that it accepts L2TP tunnels and restores the

encapsulated PPP traffic flow.

: If you select this option, the L2TP partner is configured

so that it encapsulates a PPP traffic flow in L2TP and sets up

a L2TP tunnel to a remote LNS.

Only for Connection Type =

Select a profile created in the Tunnel Profile menu for the con-

nection to this L2TP partner.

Enter the code of your device.

Enter the password.

Select whether the interface should always be activated.

The function is enabled with

The function is disabled by default.

Only if Always on is disabled

Enter the idle time in seconds for static short hold. The static

short hold setting determines how many seconds should pass

between sending the last traffic data packet and clearing the

Possible values are

short hold. The default value is

Select whether your device is to be assigned a static IP address

or whether it should be assigned this dynamically.

deactivates the

bintec Rxxx2/RTxxx2

Show Quick Links

Table of Contents