Groups - Teldat bintec R3002 Manual

Teldat GmbH
bintec Rxxx2/RTxxx2
Field
Address / Subnet
Address Range

19.3.2 Groups

A list of all configured address groups is displayed in the Firewall->Addresses->Groups
menu.
You can group together addresses. This makes it easier to configure firewall rules.
19.3.2.1 New
Choose the New button to set up additional address groups.
Firewall Addresses
Fig. 152: ->
The menu Firewall->Addresses->Groups->New consists of the following fields:
Fields in the Basic Parameters menu.
Field
Description
Description
• : Enter an IP address range with a start and
end address.
Only for Address Type =
Enter the IP address of the host or a network address and the
related netmask.
The default value is
Only for Address Type =
Enter the start and end IP address of the range.
Groups New
-> ->
Description
Enter the desired description of the address group.
.
19 Firewall
393