Teldat bintec R3002 Manual page 314

Table of Contents

Prioritize TCP ACK

LCP Alive Check

Callback Mode

Select whether the TCP download is to be optimised in the

event of intensive TCP upload. This function can be specially

applied for asymmetrical bandwidths (ADSL).

The function is enabled with

The function is disabled by default.

Select whether the availability of the remote terminal is to be

checked by sending LCP echo requests or replies. This makes

it possible to switch to a backup connection more quickly in the

event of line faults.

The function is enabled with

The function is enabled by default.

Select the Callback Mode function.

Possible values:

(default value): Your device does not call back.

: Select one of the following options:

partner to request a callback.

partner to request a callback via CBCP (Callback Control

Protocol). Needed for Windows clients.

: Select one of the following options:

mediately when requested to do so by the connection part-

period of time suggested by the Microsoft client (NT: 10

seconds, new systems: 12 seconds. It uses the call number

(Entries->Number) with the Mode

entered for the connection partner. If no number is

entered, the required number can be reported by the caller

in a PPP negotiation. This setting should be avoided where

possible for security reasons. Currently cannot be avoided

for the connection of mobile Microsoft clients via DCN.

: Your device calls the connection

: Your device calls back im-

: Your device calls back after a

: Your device calls back after ap-

bintec Rxxx2/RTxxx2

Show Quick Links

Table of Contents