Table of Contents
Advertisement
Teldat GmbH
bintec Rxxx2/RTxxx2
Fields in the menu Extended Route Parameters
Field
Description
Source Interface
New Source IP Ad-
dress/Netmask
Layer 4 Protocol
Source Port
Destination Port
Description
Enter a description for the IP route.
Select the interface over which the data packets are to reach
the device.
The default value is
Enter the IP address and netmask of the source host or source
network.
Select a protocol.
Possible values:
,
,
,
.
The default value is
.
Only for Layer 4 Protocol =
Enter the source port.
First select the port number range.
Possible values:
•
(default value): The route is valid for all port numbers.
•
: Enables the entry of a port number.
•
: Enables the entry of a range of port numbers.
•
: Entry of privileged port numbers: 0 ... 1023.
•
: Entry of server port numbers: 5000 ... 32767.
•
: Entry of client port numbers: 1024 ... 4999.
•
: Entry of client port numbers: 32768 ... 65535.
•
: Entry of unprivileged port numbers: 1024
... 65535.
Enter the appropriate values for the individual port or start port
of a range in Port and, for a range, the end port in to Port.
Only for Layer 4 Protocol =
Enter the destination port.
.
,
,
,
,
,
or
or
14 Networking
,
,
193
Hide quick links:
Advertisement
Table of Contents
