Teldat bintec R3002 Manual page 36

5 Technical data
22
Property
Relative atmospheric hu-
midity
Room classification
Available interfaces:
Ethernet IEEE 802.3 LAN
(4-port switch)
ETH5
ISDN BRI (S0)
ISDN-PRI (2)
Console/RS232
FXS (internal)
Available sockets:
Serial interface V.24
Ethernet interfaces
ISDN BRI interface
ISDN-PRI interface
FXS
Standards & Guidelines
bintec R4402
10 % to 90 % non-condensing in
operation,
5 % to 95 % non-condensing when
stored
Only use in dry rooms.
Permanently installed (twisted pair
only), 10/100/1000 mbps, auto-
sensing, MDIX
Permanently installed (twisted pair
only), 10/100/1000 mbps, auto-
sensing, MDIX
Euro-ISDN
(point-to-multipoint/point-to-point
connection)
TE or NT mode
ISDN Primary Rate Interface
TE or NT mode
Baudrates: 1200 - 115200 Baud
-
5-pole mini USB socket
RJ45 socket
RJ45 socket
RJ45 socket
-
R&TTE Directive 1999/5/EC
CE symbol for all EU states
bintec RT4202
10 % to 90 % non-condensing in
operation,
5 % to 95 % non-condensing when
stored
Only use in dry rooms.
Permanently installed (twisted pair
only), 10/100/1000 mbps, auto-
sensing, MDIX
Permanently installed (twisted pair
only), 10/100/1000 mbps, auto-
sensing, MDIX
Euro-ISDN
(point-to-multipoint/point-to-point
connection)
TE or NT mode
-
Baudrates: 1200 - 115200 Baud
4x for connection of analog tele-
phones or FAX
5-pole mini USB socket
RJ45 socket
RJ45 socket
-
4x RJ45 sockets
R&TTE Directive 1999/5/EC
CE symbol for all EU states
bintec Rxxx2/RTxxx2
Teldat GmbH