Phase-2 Profiles - Teldat bintec R3002 Manual

Teldat GmbH
bintec Rxxx2/RTxxx2
Field

18.1.3 Phase-2 Profiles

You can define profiles for phase 2 of the tunnel setup just as for phase 1.
In the VPN->IPSec->Phase-2 Profiles menu, a list of all configured IPSec phase 2 profiles
is displayed.
VPN IPSec Phase-2 Profiles
Fig. 134: -> ->
In the Default column, you can mark the profile to be used as the default profile.
18.1.3.1 New
Choose the New button to create additional profiles.
Description
you can select up to three CA certificates that are accepted for
this profile.
This option can only be configured if certificates are loaded.
18 VPN
349