Teldat bintec R3002 Manual page 431

Table of Contents

bintec Rxxx2/RTxxx2

Calling Line

Calling Address

Called Address

In the Routing Rulesmenu you can define rules to determine how the subscriber number

is manipulated before it is used for dialling.

Use Add to create more entries.

terfaces in NT mode, SIP accounts in trunk mode (server

: For calls that are not to be routed (to be blocked).

You can restrict the application of the entry to the line on which

the call comes in.

The selection depends on the interfaces available and on the

SIP accounts that have been created.

Possible values:

selected PRI interface.

selected BRI interface.

: restricts the routing entry to the selected

SIP account.

: No restriction of the entry.

You can restrict the application of the entry to a particular caller.

To do this, you must specify the subscriber number exactly (no

Enter the called address to which the rule is to be applied.

To do this, enter an address numerically (e.g. a subscriber num-

ber) or alphanumerically (e.g. for a trunk) that is to be compared

with a dialled address.

The following wildcards can be used:

• * means that at the end of a character string any number of

characters may follow,

• ? is a placeholder for an arbitrary character.

If the configured address agrees with the signalled address, the

entry is used.

: restricts the routing entry to the

Show Quick Links

Table of Contents