Teldat bintec R3002 Manual page 38

5 Technical data
24
LED Colour
STATUS green
In operation mode, the LEDs display the following status information for your device:
LED status display
LED Colour
POWER green
STATUS green
green
green
ETH 1 to 5 green
green
orange
orange
green and
orange
green and
orange
BRI 1 to 4 orange
PRI 1 to 2 orange
FXS 1 to 4 orange
DSL orange
Status Information
router.
flashing The device is being initialised.
Status Information
on The power supply is connected.
off No power supply.
on After switching on: The device has started. Dur-
ing operation: An error has occurred.
flashing The device is active.
off During operation: An error has occurred.
on The device is connected to the Ethernet at 1
Gbps
flashing Data traffic with 1 Gbps.
on The device is connected to the Ethernet at 100
mbps.
flashing Data traffic with 100 mbps.
on The device is connected to the Ethernet at 10
mbps.
flashing Data traffic with 10 mbps.
on D-channel is active.
flashing At least one B-channel is active.
on D-channel is active.
flashing At least one B-channel is active.
on Incoming call to terminal.
off The device is terminated or the connected could
not be established.
on DSL synchronisation successful. The DSL con-
nection is active (ADSL/SHDSL/VDSL).
flashing Data traffic via the DSL connection
(ADSL/SHDSL/VDSL).
Teldat GmbH
bintec Rxxx2/RTxxx2