Teldat bintec R3002 Manual page 427

Table of Contents

bintec Rxxx2/RTxxx2

Fields in the Codec Settings menu.

Codec Proposal Se-

"Display" and "User" fields of the SIP header.

: The sender ID is placed in the "Display" field

of the SIP header.

: The sender ID is sent in the "User" field of the

: The so-called "p-preferred-identity" field is ad-

ded to the SIP header and contains the sender ID.

: The so-called "p-asserted-identity" field is ad-

ded to the SIP header and contains the sender ID.

Only for Trunk Mode =

You can set a number that is added as a prefix for outgoing

calls to the sender's number and is removed from the destina-

tion number for incoming calls. This corresponds to the trunk

(exchange) number of an exchange.

Choose the order in which the codecs are offered for use by the

media gateway. If the first codec cannot be used, the second is

tried and so on.

Possible values:

(default value): the codec in the first position in the

menu will be used if possible.

: The codecs are sorted by quality. If possible, the

codec with the best quality is used.

: The codecs are sorted by required band-

width. If possible, the codec with the lowest bandwidth re-

quirement is used.

: The codecs are sorted by required band-

width. If possible, the codec with the highest bandwidth re-

quirement is used.

Select the codecs to be proposed for the connection. The co-

decs chosen here are proposed in a certain order, depending

on the setting in the Codec Proposal Sequence field.

: The sender ID is placed in both

Show Quick Links

Table of Contents