Filter List - Teldat bintec R3002 Manual

Teldat GmbH
bintec Rxxx2/RTxxx2
Field
Licence Status
License valid until

21.5.2 Filter List

In the Local Services->Web Filter->Filter List menu, you configure how the various cat-
egories of Internet pages are to be handled.
You configure the relevant filters for this purpose. A list of filters already configured is dis-
played.
There are basically different approaches for configuring the filters:
• First a filter list can be created that only contains entries for those addresses that are to
be blocked. In this case it is necessary to make an entry at the end of the filter list that al-
lows all accesses that do not match a filter. (Setting for this: Category =
, Action =
• If you only create entries for those addresses that are to be allowed or logged, it is not
necessary to change the default behaviour (= all other calls are blocked).
21.5.2.1 New
Choose the New button to create additional filters.
Local Services
Fig. 179: ->
The Local Services->Web Filter->Filter List->Newmenu consists of the following fields:
Fields in the Filter Parameters menu.
Description
Shows the result of the last validity check of the licence. The
validity of the licence is checked every 23 hours.
This shows the expiry date of the licence (relative to the time set
on your device) and cannot be edited.
or )
Web Filter Filter List New
-> ->
21 Local Services
455