Teldat bintec R3002 Manual page 343

Table of Contents

bintec Rxxx2/RTxxx2

Authentication Method

Local ID Type

Only for Internet Key Exchange =

Select the authentication method.

Possible values:

(default value): If you do not use certific-

ates for the authentication, you can select Preshared Keys.

These are configured during peer configuration in the IPSec

Peers. The preshared key is the shared password.

: Phase 1 key calculations are authenticated

using the RSA algorithm.

Only for Internet Key Exchange =

Select the local ID type.

Possible ID types:

: Any string

Only for Internet Key Exchange =

Enter the ID of your device.

For Authentication Method =

the Use Subject Name from certificate option is dis-

When you enable the Use Subject Name from certificate op-

tion, the first alternative subject name indicated in the certificate

is used, or, if none is specified, the subject name of the certific-

ate is used.

Note: If you use certificates for authentication and your certific-

ate contains alternative subject names (see

page 106), you must make sure your device selects the first al-

ternative subject name by default. Make sure you and your peer

both use the same name, i.e. that your local ID and the peer ID

your partner configures for you are identical.

Certificates

Show Quick Links

Table of Contents