Teldat bintec R3002 Manual page 183

Table of Contents

bintec Rxxx2/RTxxx2

Operation Band

Number of Spatial

your network.

Select the frequency band of the wireless module profile.

Possible values:

ated at 2.4 GHz (mode 802.11b, mode 802.11g and mode

802.11n), inside or outside buildings.

: Your device is operated at 5 GHz (mode

802.11a/h and mode 802.11n) inside buildings.

: Your device is operated at 5 GHz (mode

802.11a/h and mode 802.11n) outside buildings.

: Your device is operated at 5 GHz

(mode 802.11a/h and mode 802.11n) inside or outside build-

: Only for so-called Broadband Fixed

Wireless Access (BFWA) applications. The frequencies in the

frequency range from 5755 MHz to 5875 MHz may only be

used in conjunction with commercial offers for public network

accesses and requires registration with the Federal Network

Not for Operation Band =

Select how many channels are to be used.

Possible values:

(default value): One channel with 20 MHz bandwidth

: Two channels each with 20 MHz bandwidth are

used. In the case one channel acts as a control channel and

the other as an expansion channel.

Select how many traffic flows are to be used in parallel.

Possible values:

: Three traffic flows are used.

: Two traffic flows are used.

: One traffic flow is used.

13 Wireless LAN Controller

(default value): Your device is oper-

Show Quick Links

Table of Contents