Teldat bintec R3002 Manual page 597

Teldat GmbH
bintec Rxxx2/RTxxx2
the information providers. The provided information is accessed us-
ing the telephone number 0190 which is uniform across Germany
plus a 6-digit telephone number. Information offering: Entertainment,
weather, finance, sport, health, support and service hotlines.
Service 0700 Additional voice service from T-Com. Allows calls to be received via
a location-independent telephone number uniform across Germany,
starting with the numbers 0700. Free-of-charge routing to national
fixed network. Enhancement with Vanity possible.
Service 0900 Additional voice service from T-Com. Replaces Service 0190.
Service number 0180 Additional voice service 0180call from T-Com to receive calls from a
location-dependent telephone number uniform across Germany,
starting with the numbers 0180.
Services Euro ISDN contains service indicates with defined names. Some of
these have only historical meaning. In general, you should choose
the "Telephony" service for "real" telephone calls. If this selection
does not work (depends on network operator), you can try "speech",
"audio 3k1Hz" or "telephony 3k1Hz". The same applies for faxing.
Here, too, there is the collective term "Fax" plus a couple of more
specific cases. From a purely technical point of view, the services
are bits in a data word evaluated by means of a mask. If you include
several bits in the mask, all these services are approved for activa-
tion, while in the case of just one bit, it is just the one selected ser-
vice.
Setup Tool Menu-driven tool for the configuration of your gateway. The Setup
Tool can be used as soon as the gateway has been accessed
(serial, ISDN Login, LAN).
SHA1 See HMAC-SHA.
SHDSL Single-Pair High-Speed
Short hold Is the defined amount of time after which a connection is cleared if
no more data is transmitted. Short hold can be set to static (fixed
amount of time) or dynamic (according to charging information).
Signalling Simultaneous signalling: All assigned terminals are called simultan-
eously. If a telephone is busy, call waiting can be used.
Simplex operation This connection can only be used for an ISDN telephone (only T-
(ISDN subscribers Concept PX722 system telephones) with a simplex function. If you
only) call an ISDN telephone with a simplex function, this automatically
Glossary
583