Teldat bintec R3002 Manual page 388

Table of Contents

Fields in the IP Mode and Routes menu.

IP Address Mode

Default Route

Create NAT Policy

Local IP Address

Route Entries

Select whether your device is to be assigned a static IP address

or whether it should be assigned this dynamically.

Possible values:

(default value): You enter a static IP address.

device dynamically assigns an IP address to the remote ter-

: Only for PPTP Mode =

: Your device is dynamically assigned an IP ad-

Only if IP Address Mode =

Select whether the route to this connection partner is to be

defined as the default route.

The function is enabled with

The function is disabled by default.

Only if IP Address Mode =

When you configure an PPTP connection, specify whether Net-

work Address Translation (NAT) is to be enabled.

The function is enabled with

The function is disabled by default.

Only for IP Address Mode =

Assign the IP address from your LAN to the PPTP interface

which is to be used as your device's internal source address.

Only if IP Address Mode =

Define routing entries for this connection partner.

: IP address of the destination host or

: Netmask for Remote IP Address

: Only for PPTP Mode =

bintec Rxxx2/RTxxx2

Show Quick Links

Table of Contents