Drop In; Drop In Groups - Teldat bintec R3002 Manual

Table of Contents

bintec Rxxx2/RTxxx2

Reporting Method

14.6 Drop In

"Drop-in mode" allows you to split a network into smaller segments without having to divide

the IP network into subnets. Several interfaces can be combined in a drop-in group and as-

signed to a network to do this. All of the interfaces are then configured with the same IP ad-

Within a segment, network components which are connected to a connection can then be

grouped and, for example, be protected by firewall. Data traffic from network components

between individual segments which are assigned to different ports are then controlled ac-

cording to the configured firewall rules.

The Networking->Drop In->Drop In Groups menu displays a list of all the Drop In

Groups. Each Drop In group represents a network.

14.6.1.1 New

Select the New button to set up other Drop In Groups.

: The sender receives an ICMP message.

Define whether a syslog message is to be generated if a packet

Possible values:

: No syslog message.

(default value): A syslog message is generated with the

protocol number, source IP address and source port number.

: A syslog message is generated with the contents of the

first 64 bytes of the denied packet.

14 Networking

Show Quick Links

Table of Contents