Teldat bintec R3002 Manual page 313

Table of Contents

bintec Rxxx2/RTxxx2

Authentication

DNS Negotiation

Possible values are

The default value is .

If necessary, select a special interface use.

Possible values:

(default value): No special type is selected.

: The interface is used for incoming dialup con-

nections and callbacks initiated externally.

multi-user connection partner, i.e. several clients dial in with

the same user name and password.

Select the authentication protocol for this PPTP partner.

Possible values:

: Primarily run CHAP, on denial, the au-

thentication protocol required by the PPTP partner. (MSCHAP

version 1 or 2 possible.)

(default value): Only run PAP (PPP Password Authentic-

ation Protocol); the password is transferred unencrypted.

: Only run CHAP (PPP Challenge Handshake Authentic-

ation Protocol as per RFC 1994); password is transferred en-

: Primarily run CHAP, otherwise PAP.

: Only run MS-CHAP version 1 (PPP Microsoft

Challenge Handshake Authentication Protocol).

: Run MS-CHAP version 2 only.

: Some providers use no authentication. In this case, se-

lect this option.

Select whether your device receives IP addresses for Primary

DNS Server and Secondary DNS Server from the connection

partner or sends these to the connection partner.

The function is enabled with

The function is enabled by default.

: The interface is defined as

Show Quick Links

Table of Contents