Isdn Ports; Isdn Configuration - Teldat bintec R3002 Manual

Table of Contents

bintec Rxxx2/RTxxx2

Flow Control

11.3 ISDN Ports

In this menu, you configure the ISDN interfaces of your device. Here you enter data such

as the type of ISDN connection to which your gateway is connected. You can use the ISDN

interfaces of your gateway for various types of use.

You must carry out two steps to configure the ISDN interfaces:

• Enter the settings for your ISDN connection: Here you set the most important parameters

of your ISDN connection.

• MSN Configuration: Here you tell your device how to react to incoming calls from the

If the ISDN protocol is not detected, it must be selected manually under Port Usage

und ISDN Configuration Type . The automatic D channel detection is then switched

off. An incorrectly set ISDN protocol prevents ISDN connections being set up.

In the Physical Interfaces->ISDN Ports->ISDN Configuration menu, a list of all ISDN

ports and their configuration are displayed.

11.3.1.1 Edit

button to edit the configuration of the ISDN port.

ISDN BRI interface

Select whether a flow control should be conducted on the cor-

responding interface.

Possible values:

(default value): No flow control is performed.

: Flow control is performed.

: Automatic flow control is performed.

11 Physical Interfaces

Show Quick Links

Table of Contents