Teldat bintec R3002 Manual page 324

Table of Contents

Service Categories

The menu WAN->ATM->Service Categories->New consists of the following fields:

Fields in the Basic Parameters menu.

Virtual Channel Con-

nection (VCC)

ATM Service Category

Select the already configured ATM connection (displayed by the

combination of VPI and VCI) for which the service category is to

Select how the data traffic of the ATM connection is to be con-

A priority is implicitly assigned when you select the ATM service

category: from CBR (highest priority) through VBR.1 /VBR.3 to

VBR (lowest priority).

Possible settings:

ic data rate is guaranteed for the connection. The Peak Cell

Rate (PCR) specifies the limit above which data is discarded.

This category is suitable for non-critical applications.

nection is assigned a guaranteed data rate determined by the

Peak Cell Rate (PCR). This category is suitable for critical

(real-time) applications that require a guaranteed data rate.

rate is assigned to the connection - Sustained Cell Rate

(SCR). This may be exceeded by the volume configured in

Maximum Burst Size (MBS). Any additional ATM traffic is

discarded. The Peak Cell Rate (PCR) constitutes the maxim-

um possible data rate. This category is suitable for non-critical

(default value): No specif-

: (Constant Bit Rate) The con-

: A guaranteed data

bintec Rxxx2/RTxxx2

Show Quick Links

Table of Contents