Dhcp Configuration - Teldat bintec R3002 Manual

21 Local Services
446
21.4.1.1 Edit or New
Choose the New button to set up new IP address pools. Choose the
ing entries.
Local Services
Fig. 174: ->
Fields in the menu Basic Parameters
Field
IP Pool Name
IP Address Range
DNS Server

21.4.2 DHCP Configuration

To activate your device as a DHCP server, you must first define IP address pools from
which the IP addresses are distributed to the requesting clients.
A list of all configured IP address pools is displayed in the Local Services->DHCP
Server+DHCP Configuration menu.
In the list, for each entry, you have the possibility under Status of enabling or disabling the
configured DHCP pools.
DHCP Server IP Pool Configuration
+
Description
Enter any description to uniquely identify the IP pool.
Enter the first (first field) and last (second field) IP address of
the IP address pool.
Primary: Enter the IP address of the DNS server that is to be
used, preferably, by clients who draw an address from this pool.
Secondary: Optionally, enter the IP address of an alternative
DNS server.
Teldat GmbH
icon to edit exist-
New
+
bintec Rxxx2/RTxxx2