Interfaces - Teldat bintec R3002 Manual

21 Local Services
488
to . The ports are released internally to the gateway on demand, i.e. when an
audio/video transfer is started in Messenger. When the application is closed, the ports are
immediately closed again.
The peer-to-peer-communication is initiated via public SIP servers with only the information
from the two clients being forwarded. The clients then communicate directly with one an-
other.
For further information about UPnP, see

21.10.1 Interfaces

In this menu, you configure the UPnP settings individually for each interface of your gate-
way.
You can determine whether UPnP requests from clients are accepted by each interface (for
requests from the local network) and/or whether the interface can be controlled via UPnP
requests.
Local Services
Fig. 192: ->
The menu Local Services->UPnP->Interfaces consists of the following fields:
Fields in the Interfaces menu.
Field
Interface
Answer to client re-
quest
www.upnp.org
UPnP Interfaces
->
Description
Shows the name of the interface for which the UPnP settings
are to be made. The entry cannot be changed.
Determine whether UPnP requests from clients are to be
answered via the particular interface (from the local network).
The function is enabled with
The function is disabled by default.
.
.
bintec Rxxx2/RTxxx2
Teldat GmbH