Rtsp - Teldat bintec R3002 Manual

Table of Contents

bintec Rxxx2/RTxxx2

Fields in the Advanced Settings menu.

Speed Dialing

If you want to use a speeddial number from this list, you must dial * followed by the speed-

dial number.

20.3 RTSP

In this menu, you configure the use of the RealTime Streaming protocol (RTSP).

RTSP is a network protocol for controlling multimedia traffic flows in IP-based networks.

Payload data is not transferred using RTSP. Rather, it is used to control a multimedia ses-

sion between sender and recipient.

If you want to use RTSP, the firewall and NAT must be configured accordingly. In the VoIP-

>RTSP menu, you can activate the RTSP proxy to enable requested RTSP sessions over

the defined port if required.

The default value is .

If you terminate the number entered with #, dialling is immedi-

Define short sequences of numbers that can be dialled instead

of the entire number.

Click Add to configure new speeddial numbers.

Enter the desired speeddial number for the user, e.g.

Under Replacement enter the subscriber number to be dialled

in place of the speed dial number, e.g.

In the example above, if a user types in

If the user wishes to call extension

The device dials

A period at the end of the number indicates a complete number.

This is dialled immediately the period is recognised.

, the device dials

, he types in

Show Quick Links

Table of Contents