Teldat bintec R3002 Manual page 141

Table of Contents

bintec Rxxx2/RTxxx2

ISDN Configuration

ISDN Switch Type

uration Type.

: Detection is still running.

Only if Autoconfiguration on Bootup is disabled.

Select the protocol that you want to use for the ISDN port.

Possible values:

: The ISDN connection is not used.

Only if Autoconfiguration on Bootup is disabled and for Port

Select the ISDN connection type.

Possible values:

: Point-to-point ISDN access.

Only for Port Usage =

Select the ISDN protocol supplied by your provider.

Possible values:

nels (128 kbps)

and both B channels (144 kbps)

line to two different endpoints.

and D-channel (80 kbps)

and D-channel (80 kbps)

11 Physical Interfaces

(default value): Point-to-multipoint

: Leased line over B channel 1 (64

: Leased line over both B chan-

: Leased line over D-channel

: Leased line over B channel 1

: Leased line over B channel 2

Show Quick Links

Table of Contents